General Contractors in Desert Hot Springs, CA: ADUs & Rehabs

Quick answer

There's no defensible published range for whole projects in Desert Hot Springs, because scope varies too much. Ask for an itemized bid that shows each trade, materials, permits, the contractor's markup or fee, and a payment schedule tied to finished milestones. Permits: City of Desert Hot Springs Building & Safety. HOAs in Desert Hot Springs: low, except newer master-planned communities.

Who to call: Coachella Valley Remodeling connects you with our licensed partner contractor, who visits and gives you a written price. Free to you. Get a free quote or call (760) 766-2218.

Updated November 6, 2026 · Typical published ranges, not a quote.

Desert Hot Springs was laid out ahead of its time. Realtors platted thousands of lots across about six square miles, and the city has been filling them in ever since: spa-era cottages from the 1950s, a population that roughly doubled in the 1980s, tract homes after 2000 and master-planned streets on the western edge (Wikipedia). That leaves a lot of projects that are bigger than one trade: rehabbing an older house end to end, adding an ADU on a roomy lot, or turning a tired rental into one that rents.

Searches for “general contractor Desert Hot Springs” turn up mostly national directories and lead sites. A general contractor who actually works here should know the permit counter at 11999 Palm Drive and where the city line ends.

Projects that usually need a general contractor

Whole-house rehab of an older home. About 51% of homes in the city were built before 1990 (Census ACS 2020–2024). A 1950s–70s cottage may need a panel upgrade, new supply lines, a kitchen and bath, windows and an HVAC change all at once. One licensed GC coordinating the trades and the inspections beats four separate contracts.
ADUs. The city offers a pre-approved ADU plan program, and many lots here have room for one. It can be a rental, a home for a parent or space for grown kids. Remember that ADUs in Desert Hot Springs can't be used as short-term vacation rentals (city FAQ).
Rental makeovers. About 49% of occupied homes are rented. A landlord renovating between tenants needs paint, flooring, kitchen, bath and repairs on one schedule.
Additions and layout changes. Removing a wall, adding a bedroom or enclosing a patio means plans, structural review and inspections.
Investor and flip projects. Buyers of older stock want a firm bid, fast turnaround and repeatable finishes.

Licenses: what to check

In California, a general building contractor holds a B license. A B contractor can take a job involving at least two unrelated trades, or can do framing or carpentry. Single-trade work goes to specialty licenses, such as C-10 electrical, C-36 plumbing, C-20 HVAC, C-6 cabinets or C-33 painting.

Before you sign, check:

The CSLB license at cslb.ca.gov: active status, the right class, the bond and any complaints or discipline.
Workers' comp, if the contractor has employees, and general liability insurance with a certificate naming you.
A Desert Hot Springs business license. The city requires one of most businesses working in town, even if they're based elsewhere (city FAQ).
Subcontractors. Who they are, what licenses they hold, and a written statement that the GC is responsible for their work.

Permits: who, where and how

Inside city limits, permits come from the City of Desert Hot Springs Building & Safety Division, part of Community Development at City Hall, 11999 Palm Drive, (760) 329-6411. Applications go through the city's online portal. Larger projects may also need Planning or Engineering sign-off, so ask your GC who coordinates those.

A few local points:

City or county. Mission Lakes Country Club, Desert Edge, Sky Valley and North Palm Springs are outside city limits and permitted by Riverside County.
Owner-builder. The city has an owner-builder form for owners who pull their own permits. If you do, you're the contractor in the eyes of the law.
Inspections and closeout. A permit isn't done until the final inspection passes. Make final sign-off a condition of the last payment.

What a GC bid should show

There's no defensible published price range for a whole project here; scope varies too much. For pieces of a project, the Los Angeles figures in Remodeling's 2025 Cost vs. Value report, the nearest published metro, are a useful check: about $29,800 for a minor midrange kitchen remodel and $27,100 for a midrange bath remodel. A good bid lists:

each trade and its scope
materials by grade or model, with allowances spelled out
permits, plans and fees, and who pays them
the contractor's fee or markup
a schedule with milestones, and a payment schedule tied to them
how change orders are priced and approved, in writing, before the work

California caps the down payment at 10% of the contract price or $1,000, whichever is less, and later payments can't run ahead of the work done.

What goes wrong with multi-trade jobs

The biggest complaints about bigger jobs are about ownership: nobody answers, the subs blame each other, and a short job runs for months. Our partner agreement requires these:

One person who answers

“Nobody calls back, and everyone blames someone else.” · 34% of kitchen complaints

Our standard: One local contractor is responsible for the whole job, and one person at our office answers if they don't.

Every project gets a named contact at the contractor and at our office, plus a shared project thread. Our partner agreement requires replies within one business day and written responsibility for subcontractors. We check in at the estimate, start, midpoint, completion and 30 days.
Walkthrough before final payment

“It looks worse than what we tore out.” · 32% of kitchen complaints

Our standard: You don't make the final payment until you've walked the job with the contractor and the punch list is done.

We check our partner contractor's license classification for the trade before every introduction. At the end, you and the contractor walk the job with a written punch list, and the last payment waits until it's finished. Workmanship complaints go on the contractor's record with us.
Kitchen stays usable until materials arrive

“Five months washing dishes in the bathtub.” · 29% of kitchen complaints

Our standard: Your old kitchen stays in place until the new cabinets and stone are on site and checked, unless you choose otherwise.

Your written scope includes an estimated completion date and the order of trades. Our partner agreement requires that demo waits until the cabinets, slab and appliances have been delivered and inspected. You get photo updates every work day, and payments follow milestones.
Warranty in writing

“The lifetime warranty disappeared when the company did.” · 23% of kitchen complaints

Our standard: Our partner agreement requires at least a one-year workmanship warranty in writing, and we keep a copy.

Our partner agreement requires a written workmanship warranty of at least one year, separate from the manufacturer's, with claims acknowledged within two business days and a visit scheduled within ten. We check the contractor's CSLB record and bond and keep your documents on file.
You get exactly what you approved

“They sold me solid wood and delivered particleboard.” · 22% of kitchen complaints

Our standard: Your contract names the exact cabinet construction, finish and stone, so you get what you approved.

The itemized scope lists the cabinet line, box material, door construction, finish, hardware and slab. Our partner agreement requires deliveries to be inspected and photographed before anything is installed. For natural stone, you see and approve the actual slab.
Approve drawings before anything is cut

“The island came out four inches too narrow.” · 15% of kitchen complaints

Our standard: Nothing is ordered or cut until you've approved the drawings and the seam layout.

Our partner agreement requires on-site measurements, your appliance spec sheets, cabinet drawings and a countertop layout showing seams, overhangs and sink and cooktop centerlines. You sign off before anything is ordered or cut.
Small deposit, pay as you go

“We paid in full, and then they disappeared.” · 13% of kitchen complaints

Our standard: Our partner contractor never asks for more than 10% or $1,000 down, as California law requires. You pay as work is completed.

California caps home-improvement down payments at 10% or $1,000, whichever is less, and payments can't run ahead of completed work. Our partner agreement repeats that rule, and we review the payment schedule before you sign. We verify the license and bond at cslb.ca.gov first.
They show up, or they call

“They cancelled the install the morning of, again.” · 12% of kitchen complaints

Our standard: Our partner agreement requires every appointment to be confirmed the day before, and we track every missed one.

Our partner agreement requires day-before confirmations and at least 24 hours' notice of changes except in real emergencies. We log no-shows, and repeated no-shows end the partnership.

From about 1,600 public complaints (BBB, Yelp, CSLB) about kitchen and cabinet work that we read in 2026. How we counted

Desert Hot Springs details a GC should plan for

Wind and blowing sand. Construction sites here need dust control and secured materials; new windows and doors need good seals.
Heat. About 5 to 7 degrees cooler than the valley floor in summer, but still hot. Concrete, stucco, drywall and adhesives need early starts and the right products.
Water and power. Most of the city is on Mission Springs Water District, with some areas on CVWD; Southern California Edison provides power. New services and meter upgrades take lead time.
Termites. Opening walls in older homes is the time to find damage; ask how it would be priced as a change order.

Questions to ask a general contractor

What's your license class and number, and who are your subs?
Have you pulled permits in Desert Hot Springs recently?
What's the written schedule, and what happens if it slips?
How are change orders priced and approved?
Who is on site each day, and how will I get updates?

Nearby cities

Hiring for a project elsewhere in the west valley? The neighbors:

Common questions

When do I need a general contractor instead of a single trade?

When the project involves more than two trades, needs plans and permits, or touches structure. A kitchen with new electrical, plumbing, drywall, cabinets and counters, a whole-house rehab or an ADU are general contractor jobs. In California that usually means a B (general building) license.

Does Desert Hot Springs have pre-approved ADU plans?

Yes. The city runs a pre-approved ADU program, which can shorten design and plan review. You still need a site plan, utility connections and permits from the city's Building & Safety Division. Note that ADUs in Desert Hot Springs can't be used as short-term vacation rentals.

How much does a general contractor charge?

Can I be my own general contractor?

California allows owner-builders, and the city has an owner-builder form, but you take on the contractor's responsibilities, including hiring licensed trades, workers' comp for anyone you employ and passing inspections. For most people, a licensed GC is cheaper than the mistakes.

Who issues permits for Mission Lakes Country Club?

Riverside County, not the city. Mission Lakes Country Club sits next to Mountain View Country Estates but outside city limits. Check your parcel before anyone applies.

Last reviewed November 6, 2026. Prices and rules change; confirm details with your contractor and your city or county building department.